Energy Regulators

The BHA Energy Regulator effects its control by periodically switching the power on and off, the ratio of the on time to the total time determining the average power input. As compared with a variable resistance, the energy regulator is in general cheaper, far less bulky, and applicable to any load up to its rated capacity. Moreover, the control is effected without the loss of energy associated with resistance control, is variable continuously from no load to full load and is substantially independent of mains voltage fluctuations up to about 20%.

Functional Description: The energy regulator mainly consists of
a heated bimetal and a snap-action switch (spring contact).

Technical Specifications :

• Line Input: 230v + 20%, Single Phase, 50hz, 1kw Max, Up To 3kw For 3
  Hours Max. Can Supply As Per Customer's Input Specification
• Range : 6% To 85% Adjustable
• Temperature : Can Adjust Temperature Up To 300 Degree Centigrade By
  Dial Setting
• Isolation : 2.5kv A.C, For 1 Minute, Leakage Current <3.5ma
• Leakage Current : Less Than 210 Micro Amp. As Per Is 302
• Operating Temperature: 0 To 50 Degree Centigrade
• Life : 1,00,000 Switching Cycles Under Normal Conditions
• Safety : Meets Vde, Iec Standards
• Emc : Ce Marked
• Dimensions : Length-50mm Width-41mm Height-74mm Approx.
• Weight : 110gm Approx. Without Dial Plate

Applications : Annealing, Melting Pots, Industrial cooking, Dies, Platens, Comfort heating, Electric furnaces, Molding, Industrial hot
plates, Laboratory ovens.